• mT-Panoptes_TS

  • What is mT-Panoptes
    mT-Panoptes is an inspection system designed for thermal aerial surveys using small RPAS (Remoltely Piloted Aircraft Systems). The system is composed by a 2 channel device, an Electronic Control Unit (ECU), a Ground Control Station (GCS) and the Solar Inspector (its software application) and drives you from data acquistion to Final Report generation. mT-Panoptes has been conceived to use small drones to inspect photovoltaic plants, but can be employed in a wider application range (everywhere georeferenced thermal imagery is needed).

    mT-Panoptes top configuration uses as TIR sensor a Flir Vue Pro 640 with a 13 mm lens. The device can be also configures with lower resolution thermal cores, such as Flir Vue Pro 320.

mT-Panoptes top configuration: the TIR sensor is a Flir TAU 640 with a 13 mm lens the device can be configured with lower resolution thermal cores, such as Flir TAU 320 mT-Panoptes is coupled with a dedicated cart, designed to be mounted on various RPA systems

Detector Detector Uncooled micro bolometer CMOS sensor
Optical Format (4:3) 16/9
Resolution 640 (H) x 512 (V); 324 (H) x 256 (V) 1280 (H) x 720 (W)
Pixel size 17 μm x 17 μm -
Frame rate 9 Hz 30-60 fps
Temp. measur. range -40 °C to 160 °C (High Gain)
-40 °C to 550 °C (Low Gain)
Temp. meas. accuracy ± 0.2 °C -
Focal lenght / HFoV-VFoV 13 mm /45°-37°; 6.8 mm /45° – 35° - /73°- 45°
Sensivity < 50 mK (NEdT)
Spectral response 7 – 13.5 μm Visible range
Gimbal 2 axis brushless (tilt, roll), independent IMU integrated
Integrated ECU Records metadata onboard up to 50 Hz, sends live videos and metadata to the ground up to 10 Hz
GCS Receives live videos and metadata
Data Output PAL / NTSC video PAL / NTSC video
Physical Dimensions 171 x 119 x 119 mm
Weight 550 g
Other features Start/stop recording, Gimbal pitch control, Change TIR* color palette, Capture TIR* still image